Acrylic heteropolymer silicone emulsion based high quality durable paint for external surfaces.

This paint can be applied in the following areas:

• concrete, plaster, metal, and other surfaces of external elements of buildings after application of suitable primers;
• where appropriate, on internal surfaces.

• perfect adhesion to treated surfaces;
• prevents penetration of rain waters inside buildings due to water repulsing properties;
• does not form cracks and does not peel off;
• resistant to rain, humidity and direct sun rays;
• provides resistance to negative effects of salt water on sea-shore structures;
• resistant to subsequent yellow discoloration.

Preparation of the surface. Prior to the ROKOL Silicone paint application, the bubbled, loose and crumbly coatings should be scraped; the surface should be free of fat, rust and other residues deteriorating adhesive force. Before application the surface should be treated with silicone primer. If required, cracks and holes in the surface should be repaired with F-Pas facing paste.

Application. The paint should be applied onto the surface using brush or roller in 2 layers: to apply the first layer dilute 4 parts of the paint with 2 parts of water, and to apply the second layer – with 1 part of water. The layers should be applied in 1 hour interval. During application the ambient temperature should be above +50C, and the relative air humidity should be below 80%. The ROKOL Silicone paint can be applied onto the freshly plastered surfaces in 21 days after plastering.

150-175 g of the paint may cover 1 m2 surface.

The product can be stored 2 years in original closed cans in the areas protected from direct sun rays and frost, at ambient temperatures between 0°C and +35°C.

• keep the product away from fire;
• to prevent inhalation of paint vapors use appropriate personal protective equipment;
• keep the product away from children;
• prevent contact with face and skin;

• information indicated in technical specifications is based on scientific and experimental data;
• Matanat А company is responsible for the product quality only;
• with the exception of cases of works executed under the supervision of the company specialists, Мatanat А company shall not be liable for any problems occuring due to improper use of the product by other persons;
• the company reserves the right to make changes in its product in consequence of scientific-and-technical development;
• for technical support and or more information please do not hesitate to contact the Matanat А company!