3 AZN
PRODUCT DESCRIPTION
Lime product for AZERLİME plaster is highly active hydration (caustic) lime made from natural limestone using a special technology. This product is added to the mixture of sand and cement, so that lime plaster is obtained.
Compliant with the requirements of ГОСТ 9179-77 and TS EN 459-1 standards.
FIELD OF APPLICATION
It is used in plastering, masonry of walls built of brick, sawdust and other types of stones in inner and outer surfaces of buildings and in forming smooth surfaces on the floors in various areas of construction industry.
RULES OF USE
Add water in the amount of 15-18% of the mixture to the finished dry mixture, wait for 3-5 minutes, and then mix. Use ready to use plaster in plastering of the walls made with red brick, sawn stone and other types of stones, masonry works and smoothing surfaces. The amount of dry construction mixtures and water required for the preparation of the finished product is shown in the following table.
İnstruction of finished mixture
|
Amount of mixtures (weight) |
Amount of mixtures (scoop) |
Mile for plaster
|
5,7 kg |
1 scoop |
Cement M300 |
13 kg |
1 scoop |
Plaster sand |
81,3 kg |
6 scoops |
Amount of required water |
15-18 l |
15-18% |
TECHNICAL CHARACTERISTICS OF LIME PLASTER
AZERLİME
Color Light gray
Usage temperature +50C -+300C
Water/Lime plaster 15-18 l water/100 kg plaster
Duration of use 120 minutes
Application thickness
minimum 8 mm
maximum
(by step-by-step application) 100 mm
Ready to use product density 2100 kg/m3
Product density after drying 1800 kg/m3
Strength limit in:
bending 2 N/mm2
compression 5 N/mm2
PACKAGING
AZERLIME the lime product for plaster is packed in 20 kg polyethylene or paper sacks, 500 and 1000 kg polyethylene Big Bag sacks.
STORAGE PERIOD AND PROCEDURE
It can be stored for a year in unopened sacks, under dry conditions, putting on top of each other and being maximum 10.
WARNINGS
Special attention is paid to the cleanliness of the water, the container and the floor when preparation of the mixture using the AZERLIME product.
Do not add any additional substance to the lime and plaster mixture other than water.
WARRANTY AND TECHNICAL SUPPORT
Information in the specifications is based on the scientific and practical knowledge;
“Mətanət A” guarantees that the product complies with the relevant technical requirements and state standards.
Except for the works performed under the supervision of company specialists, “Mətanət A” is not responsible for any problems that may arise by the other users during the outsources use;
The company reserves the right to change the product related to the scientific and technical development.
Contact “Mətanət A” for technical support, or more information!
After registering on the site, you will be able to track the status of orders, your personal account and other new features
Məhsul haqqında rəy əlavə edin