BENAFTON is an insoluble, oil refining, brown liquid being formed after the distillation of naphthenic acid. It contains up to 95% naphthenic acid.

This product can be applied in the following areas:

• Grinding of clinker and mineral fillers both separately, and in combination with other surface-active substances for the purpose of intensification of grinding process and increase of hydrophobicity of dry mixes prepared of these substances.

• Increases physical and mechanical properties of gypsum and cement-based dry mixes, including durability;

Application. Use the Benafton admixture after weighing it on a corrected (electronic) weighing scale. Apply this admixture in a recommended amount by means of dripping into the system in the I or II chamber of clinker, limestone or gypsum mills, or directly onto the transporter carrying clinker, limestone and gypsum to the system.

Apply the product in the amount of 0,2-0,6 % of the grinded raw material (limestone, gypsum, clinker).

The unopened product can be stored during 12 months in dry conditions.

• When using the product,observe the operational and occupational safety regulations, and wear the corresponding safety clothing, safety gloves, glasses, and respirators;
• Taking into consideration that the product may cause an allergic reaction and itch, avoid a contact of its components with the skin or eyes, otherwise immediately rinse them with large amount of water and soap;
• In case of swallowing of the product, immediately consult a doctor;
• Do not keep food products in the areas of its application;
• Keep the product away from children.

• Information indicated in the technical specifications is based on scientific and practical knowledge;
• “Matanat А" company is responsible only for the product quality;
• Except for the works carried out under the guidance of the company specialists, “Мatanat  А" company bears no responsibility for any problems that may occur as a result of improper use of the product by other users;
• The company reserves the right to make changes to its product that may occur due to a scientific and technnological development;
• For technical support or more information please do not hesitate to contact “Matanat А" company!