6.64 AZN
Gypsum based, high quality perlite prime plaster enriched with mixtures expanding opportunities for the product application.
Gypsum based, high quality perlite prime plaster enriched with mixtures expanding opportunities for the product application. The product conforms to the requirements of the AZS 052 (TS 6433) standard.
This plaster primer can be applied in the following areas:
Preparation of the surface. Please pay attention to the treated surface: it should be healthy, dry, clean, and should have required dimensions; the surface should be totally free of fat and paraffin residues deteriorating adhesive force. In case the surface has 5-6 mm deep cracks or pores, they should be filled with Filkret 300 or 400 repair mixtures the day before use. Herewith the surface to be treated should first be dampened or primed with Binmader primer.
Preparation of the mixture. Pour 10 kg powder mix to 6.0 - 6.5 liters of water, wait 3-4 minutes, then mix using a mixer or any suitable hand tool till the mixture is entirely homogeneous. After preparation of the plaster do not add any fresh powder or water to it.
Application. Apply the prepared AGDAG primer onto the surface treated with cement or sand based plaster. Apply the primer onto the surface to form at least 3-5 mm thick layer. The AGDAG primer consumption may differ depending on the surface type. In 24 hours after the primer application the mixtures prepared using white plaster may be applied onto the surface. The AGDAG primer ready for application should be used within 100-120 minutes. The mixture should not be used after this period expired or crust formed.
Recommendations. At the time of application of the primer the ambient and surface temperature should be minimum +50C. If at the time of application the ambient temperature exceeds the limits of +50C - +300C range, then the required temperature level should be provided. The product should not be used in warm (above +300C), rainy and windy weather conditions. The can and the equipment used for preparation of the mixture should always be clean. After use all hand tools and devices should be immediately cleaned with water. Dirty cans and tools reduce the useful life of the mixture.
The AĞDAĞ primer product consumption at 3-5mm thick level of an even surface is 3-5 kg. 1 sack of AĞDAĞ primer product should be enough to cover 6-10 m2 area.
The product can be stored during 6 months in sealed sacks in closed areas, on wooden racks, maximum 10 sacks per rack placed one over another, provided they do not contact with the floor.
After registering on the site, you will be able to track the status of orders, your personal account and other new features
Məhsul haqqında rəy əlavə edin