Epoxide based two-component coating product enriched with chemical components, providing special protection for concrete and steel (metal) from external effects.

This product can be applied in the following areas:

• indoor and outdoor areas;
• metal tanks and concrete reservoirs;
• being resistant to chemical substances can be used for protection of walls in oil and fuel storage areas from gases and vapours;
• power plants, sugar factories, hangars, and liquid product storages;
• potable water reservoirs;
• beer, wine, and raisin production facilities;
• crude oil storages and paper production facilities;
• beverages and fruit juices production;
• canned goods production;
• industry of meat and fish products;
• pharmaceutical industry, production of paints and poisons;
• printing houses and laundries;
• hospital laboratories, canteens, and hygienic environments

• Creates brilliant surfaces;
• Has antibacterial features;
• Creates hygienic conditions for easy cleaning;
• High mechanical strength;
• Prevents formation of microbes;
• Due to high elasticity the surfaces treated with the product withstand moving loads;
• Can be applied using brush, paddle roller, or spray applicator gun;
• Resistant to water.
• Suitable for reliable application in potable water reservoirs.

Preparation of the surfaces. The concrete and/or metal surfaces to be treated with IzoFakt should be healthy, clean, dry and even.

Preparation of the mixture. Carefully pour the hardening agent - Component B resin to the Component A, and mix during 3-5 minutes using 400-600 RPM mixer till the mixture is entirely homogeneous. Mix again in approximately 3-5 minutes during 30-second period, bringing the product to conditions ready for application.

Mixture preparation ratios:

Component A:   4.36 kg;

Component B:   0.64 kg.

The mixture density: 1.5 kg/liter

On concrete surfaces:The cement based surfaces of installations and constructions being in contact with water should be healthy, dry, dust-free, clean, and even. The surface should be totally free of any fat, rust, paraffin, and other substances deteriorating adhesive force. Small metal and wooden particles should be removed from the surface; places of active water soakage should be filled with Izоkontakt 1 product. The IzoFakt product should be applied onto the surface at least in 28 days after laying concrete.

On metal surface: The metal surfaces should be totally free of any fat, rust, paraffin, and other substances deteriorating adhesive force. Cleaning may be performed by sandblasting (by means of coarse-grained glass sand supplied under high pressure or special caustic substances). In case it is impossible to clean the surface with glass sand, it can be cleaned using apparatus supplying hot air, pneumatic drill, and/or rotary wire scratcher. The IzoFakt product should be applied onto the surface immediately after cleaning. The surface should be protected from corrosion.

It is recommended to apply the IzoFakt product in two layers. Consumption for each layer is approximately 0.2-0.4 kg/m2. Thickness of the powder mix of the IzoFakt product equal to 0.125-0.250 mm is enough.

The product can be stored during 12 months packed in original sacks in dry and cold conditions, protected from freezing.

• When applying the IzoFakt product, wear appropriate personal protective equipment;
• taking into consideration that the product contains chemical mixtures, immediately rinse it with large amount of water in case of contact with skin or eyes;
• keep the product away from children;
• after the product application immediately wash the used instruments with water;
• after setting the IzoFakt product can be removed by mechanical means only;
• parameters indicated above have been received on the basis of laboratory tests conducted in the ambient conditions of +230C±20C temperature and 50% + 5% humidity. Depending on the actual ambient conditions these parameters are subject to change.

• information indicated in technical specifications is based on scientific and experimental data;
• Matanat А company is responsible for the product quality only;
• with the exception of cases of works executed under the supervision of the company specialists, Мatanat  А company shall not be liable for any problems occuring due to improper use of the product by other persons;
• the company reserves the right to make changes in its product in consequence of scientific-and-technical development;
• for technical support and/or more information please do not hesitate to contact the Matanat А company!